LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old March 10th 04, 05:48 AM
Cecil Moore
 
Posts: n/a
Default

Steve Nosko wrote:
100W XMTR---50 ohm coax---x---1/2 WL 450 ohm ladder-line---50 ohm load


Assuming yes... I think you are saying that we have a 450 ohm line and a 50
ohm load and therefore there is a reflection. Is that where you are?


Yes, there are reflections on the 450 ohm ladder line and none on the 50
ohm coax.

There
is no reflected energy on the 50 ohm coax and therefore no momentum in
the reflected waves on the 50 ohm coax.


I think you contradicted yourself here. Are you saying that there IS or
IS NOT reflected energy/waves on the 50 ohm section (to the left of the
"--x--"??


No contradiction. There's no reflected energy on the 50 ohm coax because
those two reflections are cancelled at the Z0-match point 'x'. They are
equal in magnitude and opposite in phase.

So what changes the direction
and momentum of the energy wave reflected from the load?


You lost me here. Perhaps you are asking; "If there is a wave
reflected at the end with the 50 ohm, back toward the left, how does this
power then get absorbed IN that load?" Is this the question?


No, there is 178 joules/sec rejected by the load on the 450
ohm line. That energy possesses direction and momentum toward the source.
What reverses the direction and momentum of that reflected energy?

The wave, in the 450 section, reflected from the load is NOT the power being
delivered TO the load, so it does not have to be "changed' to be delivered
there.


There is 100 joules/sec traveling to the right and none to the left on the 50 ohm
coax. There is 278 joules/sec traveling to the right and 178 joules/sec to the left
on the 450 ohm ladder-line. How does the rearward traveling 178 joules/sec, rejected
by the load, get turned around and join the forward traveling 100 source joules/sec
in order to add up to 278 joules/sec of forward power on the ladder line that is
incident upon the load?

It's a simple question: How does energy rejected by the load become energy incident
upon the load?
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Complex Z0 [Corrected] pez Antenna 41 September 11th 03 06:00 PM
Derivation of the Reflection Coefficient? Dr. Slick Antenna 104 September 6th 03 03:27 AM
The Cecilian Gambit, a variation on the Galilean Defense revisited Richard Clark Antenna 11 July 24th 03 08:30 PM


All times are GMT +1. The time now is 04:55 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017