LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old June 16th 08, 06:16 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: May 2008
Posts: 6
Default 40m centre feed dipole, I want to add 80m

Andy wrote:

My question. What are my options to enable me to operate 80 and 40m on this
same antenna wire?


You could get trap dipoles for the 80 and 40m band with almost the
dimensions of a 40m dipol, e.g Diamond W-8010


My antenna book shows a short antenna for 80 and 40m which is called
"Morgain antenna". It was originally produced in the USA.

http://i4ewh.altervista.org/ShortWav...in/Morgain.htm

--
73
DJ4PB


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Use of lattice line to feed dipole John, N9JG Antenna 56 September 25th 06 05:59 PM
right angle feed thru? ml Antenna 2 February 12th 05 06:26 PM
Dipole centre cap WL2Know Homebrew 1 January 21st 04 10:42 PM
Problem with 40m halfwave off-centre toroidal balun feed Bob Antenna 3 December 24th 03 08:51 PM
70 ohm dipole to 50 ohm feed line question Tom Sedlack Antenna 10 October 6th 03 01:24 AM


All times are GMT +1. The time now is 02:34 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017