Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Dear JB;
Don't know if you are familiar with a hinged tower base, but the only way this one would "hinge" is to remove all 4 bolts. Try that with a 60 foot tower on the hinge. Yes, I tried everything with two sections and it was a total nightmare, impossible to work as advertised. I sent digital pictures to the factory, have not heard back a peep. I had to use a scissors jack, baseball bat and large axe just to get the hinge pins inside the tower legs, along with lots of heavy silicone grease, thent he holes would not line up... On Fri, 07 Nov 2008 00:15:21 GMT, "JB" wrote: You really need to make sure things are all aligned and fit before pouring the footing. Even then a 3# sledge can come in handy. It's good you at least had parts that "could" fit. |
#2
![]() |
|||
|
|||
![]() "Jim" wrote in message ... Dear JB; Don't know if you are familiar with a hinged tower base, but the only way this one would "hinge" is to remove all 4 bolts. Try that with a 60 foot tower on the hinge. Yes, I tried everything with two sections and it was a total nightmare, impossible to work as advertised. I sent digital pictures to the factory, have not heard back a peep. I had to use a scissors jack, baseball bat and large axe just to get the hinge pins inside the tower legs, along with lots of heavy silicone grease, thent he holes would not line up... Proves my point about checking things out before trying to put it up. You bought it on Ebay from OldTowerGuy? The name says "let the buyer beware" In that case, at least you got a "tower". Did you check how bad the rust was before putting it up? We have all been burned at some time in our lives. I took a 327 Chevy block to be rebuilt, and they put me off for over a year. After much cajoling and even hitting them with a lawsuit just to get (some) of the parts back, I dropped the suit and they (local mob I guess) sicked the cops on me and I was followed around and pulled over constantly and threatened all over town until I joined the service just to get away. I figured that if I was going to be shot at, I might as well go to war and get paid for it. I guess the shop was a front for political contributions or something. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Good grief, now I owe THIS group some on-topic posts. | Digital | |||
Good grief, now I owe THIS group some on-topic posts. | Digital | |||
FS- Tower parts | Swap | |||
American Tower | Swap |