Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
Nigel Molesworth wrote:
A little OT for this group, but I figure you guys are the experts! I've got a boat, it has an VHF FM Car Radio with a car aerial. The first problem is that there is no ground plane, the boat is GRP. It is also lying horizontally, it is too long to be vertical. I want to replace the aerial something a bit more suitable. Modern cars seem to have much shorter aerials, so is there a coil involved? Any suggestions on making or buying a replacement? BTW, the radio has a DIN antenna socket, so 150 Ohms I think? IME,Most car radios are sensitive and selective enough to pull in local stations with only a short wire hanging out of the antenna socket. I've routinely checked them out on the bench,and just stuffed a piece of hookup wire in the antenna jack,works fine. Maybe you could just run a wire up some vertical-surface of the boat? There *IS* a ground plane-The water. When the boat is in the water,the water itself is the ground plane. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
antenna construction | Antenna | |||
antenna construction | Antenna | |||
Understanding Shortwave Radio Listening and Antenna Design and Construction | Shortwave | |||
PVC for antenna construction ? | Antenna | |||
Understanding Shortwave Radio Listening and Antenna Design and Construction | Shortwave |