Home |
Search |
Today's Posts |
#13
![]() |
|||
|
|||
![]()
"Bob Dixon" wrote in message
... I have seen hams use silicon sealant to fill a UHF connector before screwing it together. The idea is to keep out water. (The connection is also taped or sealed with Coax seal). Is this a good idea? Bob W8ERD NO! The silicone will impair the connection, the dielectric, makes a fumbling mess and usually causes the tape to come off. Just tightly wrap with electrical tape and tie off the loose end. It will outlast the coax. Unless the antenna itself is prone to leak into the connector. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Mope the dope, when are you giving head at a truckstop next? | CB | |||
Not only is Mope the dope a coward... | CB | |||
Source for Red-X Corona Dope Needed | Boatanchors | |||
Why They Call it "Dope" | Shortwave |