radio aerial (antenna) won't stay in position
On Wed, 4 Mar 2009 11:22:44 -0000, "john zeiss"
wrote: It now refuses to maintain its position at an *angle*. Slowly but surely it drops down until it reaches the horizontal position. This is because of the loss of equilibrium in the gussian particels. They have become diamagnetized with the corresponding failure to support internal current flow which formerly held that antenna at is optimum non-vertical angle for efficient operation. Now that your antenna (aerial borealis) has assumed full horizontality you should think, instead, of tilting the radio to the proper vector relationship that fully matches with the integral weak-force buoyancy. 73's Richard Clark, KB7QHC |
radio aerial (antenna) won't stay in position
Richard Clark wrote:
On Wed, 4 Mar 2009 11:22:44 -0000, "john zeiss" wrote: It now refuses to maintain its position at an *angle*. Slowly but surely it drops down until it reaches the horizontal position. This is because of the loss of equilibrium in the gussian particels. They have become diamagnetized with the corresponding failure to support internal current flow which formerly held that antenna at is optimum non-vertical angle for efficient operation. Now that your antenna (aerial borealis) has assumed full horizontality you should think, instead, of tilting the radio to the proper vector relationship that fully matches with the integral weak-force buoyancy. 73's Richard Clark, KB7QHC Richard It could also be that the micro SpinDizzy drive in the antenna tip has run out of anti Higgs bosons. This would result in an unavoidable gain in mass causing the antenna to droop. tom K0TAR |
All times are GMT +1. The time now is 04:10 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com