Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
On Tue, 15 Sep 2009 11:52:19 +0100, "christofire"
wrote: No, you have it wrong again - the current must be zero at the ends, there is nowhere for it to go, and there cannot be acceleration of charge is there's no current. Please go away and read some books and the NEETS module to which I provided the link. Chris Hi Chris, This mistake is being compounded daily, so it seems. The "absence" of current on any particular portion of the antenna is the superposition of two currents flowing - hence the term "standing wave antenna." Hence there is something of a paradox that where two currents reside (the metal elements are continuous and conductive) it is said no current flows. There is a correlation between this superposed solution and the pattern of the far-field pattern but that does not lead to the conclusion that there is no "acceleration" of charge at the ends. After-all, the abundant alternating voltage at those same ends is also charge, n'est pas? It could be as easily argued that superposed voltage nodes also define the pattern of the far-field pattern. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Hustler G7-144 vs G6-144 vs dipole radiation pattern | Antenna | |||
Radiation Pattern Measurements | Antenna | |||
Measuring beam radiation pattern | Antenna | |||
Vertical Radiation Pattern? | Antenna | |||
Visualizing radiation pattern | Antenna |