LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old November 23rd 09, 08:13 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 464
Default How can one make a dummyload from a LC circuit ?

A "pure" LC circuit is lossless... both the L and the C are pure
reactances, and neither will (or can) dissipate any power.


Not dissipate but surely radiate in a closed box!


It will not radiate efficiently.

The radiation resistance of a physically-small coil is going to be
very small... a small fraction of 1 ohm. What your transmitter is
going to "see" will consist of:

- The radiation resistance of the circuit (probably less than 1 ohm),

in series with

- The loss resistance (mostly in the coil)

in series with

- Whatever reactance remains after the series L and C resonate against
one another.

If the coil is "perfect" (lossless) and the L and C reactances are
equal and opposite, then all you'll be left with is the radiation
resistance.

If it's in a closed (shielded) box, matters get *worse*. The presence
of the reflections from the walls will reduce the radiation resistance
even further.

Will your transmitter be happy with a load which looks almost exactly
like a short circuit to ground.

Yes, it's for a single frequency. Since an antenne is also a LC-circuit
that doesn't get warm but radiates in fields.


And it radiates with reasonable efficiency, precisely because it's
physically large - it has a substantial radiation resistance.

This will not be the case for a physically-small LC circuit.

I had it all open built so i suspect mantelwaves etc. But on paper a series
LC circuit forms a loading of a particular Zo. This statement is still right?


No, I don't think so... at least, not in the way that you think.

If you show us the specific circuit you're thinking of (components and
their values, wires, and desired operating frequency) we can analyze it.

Lets say an input on a semiconductor p.a. stage with an LC series circuit..


A series LC circuit is not, by itself, going to present a resistive
impedance.

--
Dave Platt AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Waters 334 Dummyload wattmeter w5kcm Boatanchors 1 September 6th 09 10:01 PM
Cantenna dummyload oil RP[_2_] Homebrew 11 February 20th 08 02:01 PM
How do you make RF circuit boards? [email protected] Homebrew 3 October 28th 07 01:35 PM
FS: Motorola Dummyload & Testset Walter Treftz General 0 January 17th 04 05:23 PM
FS: Motorola Dummyload & testset Walter Treftz Boatanchors 0 January 17th 04 05:21 PM


All times are GMT +1. The time now is 05:53 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017