Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]() Instead of this, why not use identical feedline lengths into a Tee and position one cross polarised antenna 0.25WL in front of the other, to obtain the 90-deg phase shift? David, VK3BDK Doing as you propose is possible, and would produce the same circular polarization on the antenna boresight. But moving away from the boresight, the circularity of polarization would degrade (into elliptical polarization) faster than if instead using a quarter-wavelength delay on one of the two feedlines. 73 Tony I0JX |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
impedance matching | General | |||
Best Yagi impedance | Antenna | |||
Yagi Stacking question | Antenna | |||
How to Measure a 2M Yagi Impedance? | Antenna | |||
FA: 2m ssb loops with stacking harness | Swap |