LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old March 31st 04, 05:39 PM
Tam/WB2TT
 
Posts: n/a
Default


"K9SQG" wrote in message
...
It might be simpler to use open wire feedline and a link coupled tuner or

tuner
with a balun in the shack...


The whole idea is that he does not need a tuner, except possibly the high
end of 10m, and the radio's built in tuner should suffice for that.

BTW, you do not want to use RG58 in lengths greater than about 2 meters. If
you want to keep costs down, buy generic RG8 Foam.


Tam/WB2TT


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Smith Chart Quiz Radio913 Antenna 315 October 21st 03 05:31 AM
A Subtle Detail of Reflection Coefficients (but important to know) Dr. Slick Antenna 199 September 12th 03 10:06 PM
Reflection Coefficient Smoke Clears a Bit Dr. Slick Antenna 126 September 10th 03 04:26 PM
Length of Coax Affecting Incident Power to Meter? Dr. Slick Antenna 140 August 18th 03 08:17 PM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 29th 03 11:24 PM


All times are GMT +1. The time now is 08:46 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017