Home |
Search |
Today's Posts |
#25
|
|||
|
|||
Elevated vs buried radials
Richard Clark wrote:
On Thu, 30 Sep 2010 14:44:53 -0700, Jim Lux wrote: For a lot of operators, a 1 dB change in performance might not be noticeable. That 1dB is at the periphery of a radius where surface area (customers) mounts up by the square. For broadcasters, sure. But the discussion is in reference to the potential performance difference for ham use, and I would think that there is more than 1 dB variation in the "other end" of the link. The hard core DXer or QRPer digging the signal out of the noise will care, but that's a small fraction of the overall ham population. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Elevated Screwdriver And Radials? | Antenna | |||
Gap antennas, elevated radials | Antenna | |||
Buried Radials - a new look! | Antenna | |||
Distance between outer ends of buried radials | Antenna |