Home |
Search |
Today's Posts |
#36
![]() |
|||
|
|||
![]() Bill First - I want to be clear that I have absolutely no problem with using the term GAIN for describing antenna performance. I did think had not been established, in this thread, that an antena's gain has to be referanced to some standard antenna, like a dipole or theoretical radiator like 'isotropic'. I'd submit that, what we refer to as antenna gain could be more accurately be called 'specific gain'. I also tink that the term Directivity clears up any misunderstanding about what can be done to improve an antenna's performance. And, I realize that my thinking about Gain and about Directivity dont imply that anyone needs to exclude either from their vocabulary I suspect my caution about antenna gain stems from reading specs that display extremely high "gain" numbers while the antennas are actually quite ordinary. Jerry "Bill Turner" wrote in message ... On Sat, 10 Apr 2004 15:59:56 GMT, "Jerry Martes" wrote: I'll be carefull if you'll tell me how to do it. Jerry __________________________________________________ _______ Only one "l" in careful Jerry, not a good start. :-) 1. Decide on your reference, most likely a dipole. 2. Measure the field strength of the dipole in its most favored direction. 3. Measure the field strength of the antenna under test in its most favored direction. 4. Calculate the gain or loss of the antenna under test. 5. Post the results here and be prepared for an onslaught of criticism. -- Bill, W6WRT QSLs via LoTW |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |