Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Hi Ralph,
Ralph Mowery Inscribed thus: "Baron" wrote in message I've tended to prefer a gamma match... its far more flexible in terms of matching and does the balanced to unbalanced conversion as well. The gamma match does not seem to be thought of as working very well at vhf and above. I've never had any real problems even at 23cms. Certainly non even with other feed techniques that I've tried. Also it defeats some of the purpose of a balun on a beam. I agree that it wont necessarily prevent common mode currents on the co-ax. The balun is to keep the current in the antenna balanced which the gamma match will not to. This tends to skew the pattern of the antenna if the current is not balanced on the antenna elements. I've not really noticed any problems with pattern skew, though I have no doubt that it occurs. I suspect that it would be more of a issue with phased arrays. OT. Merry Christmas to all. (*) -- Best Regards: Baron. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
SWL Newbies : The Magnetic Long-Wire Antenna Balun - A Balun It Ain't | Shortwave | |||
Yagi Balun designs | Antenna | |||
FS: Dualband 2m/70cm yagi and 6m yagi | Antenna | |||
FS: Dualband 2m/70cm yagi and 6m yagi | Swap | |||
Advice wanted:T-match Coax Balun for Yagi Beam | Antenna |