tying off antenna; proper guy wire tying?
 

Just put up a 80 meter dipole today, but had some difficulty with two
things: proper tying off of the lift/ support rope and proper tying off of
the guys. When I say "support rope" here's what I mean: one side of the
dipole was anchored high in a tree while the other from a 30' telephone
pole. The tree had a pulley installed, so the "support rope" hangs down
from there as well as the eye bolt from the telephone pole (support rope
through the eye bolt). So, I'm not sure where or how to tie the support
rope ends. Right now, on the tree side, I just have several turns around a
low branch with a knot; basically the same with the telephone pole side.
What is the proper way to secure the base of the supoort rope?

How do I tie the guy wires?

Thanks for any help.

tying off antenna; proper guy wire tying?
 

"Radiohouse" wrote in message
...
Just put up a 80 meter dipole today, but had some difficulty with two
things: proper tying off of the lift/ support rope and proper tying off of
the guys. When I say "support rope" here's what I mean: one side of the
dipole was anchored high in a tree while the other from a 30' telephone
pole. The tree had a pulley installed, so the "support rope" hangs down
from there as well as the eye bolt from the telephone pole (support rope
through the eye bolt). So, I'm not sure where or how to tie the support
rope ends. Right now, on the tree side, I just have several turns around
a low branch with a knot; basically the same with the telephone pole side.
What is the proper way to secure the base of the supoort rope?

Some people use gravity in the form of a bucket with rocks or scrap
concrete. It takes up slack (or pays out) as dictated the wind or ice load
on the antenna.

How do I tie the guy wires?

Clarify guy wires, please. I have three dipoles, none with guy wires.

"Sal"

tying off antenna; proper guy wire tying?
 

Basically, however you have to, or can. There's not just 'one way' to
do it, it's whatever 'fits' your particular situation. If there's
much wind, and if using trees for supports (for example), it's a good
idea to 'allow' for some movement (as Sal said). A bucket of rocks, a
bungee cord, or tarp strap can work.
- 'Doc

tying off antenna; proper guy wire tying?
 

On Sat, 26 Nov 2011 18:57:40 -0500, Radiohouse wrote:

Just put up a 80 meter dipole today, but had some difficulty with two
things: proper tying off of the lift/ support rope and proper tying off
of the guys. When I say "support rope" here's what I mean: one side of
the dipole was anchored high in a tree while the other from a 30'
telephone pole. The tree had a pulley installed, so the "support rope"
hangs down from there as well as the eye bolt from the telephone pole
(support rope through the eye bolt). So, I'm not sure where or how to
tie the support rope ends. Right now, on the tree side, I just have
several turns around a low branch with a knot; basically the same with
the telephone pole side. What is the proper way to secure the base of
the supoort rope?

How do I tie the guy wires?

Thanks for any help.

I use polyester dacron antenna rope. Guy wires are impractical for your
application. The dacron will try to untie itself, so flatten the knot
with some PVC tape to keep it from unraveling. The tree end needs a short
rope with a pulley, and a counterweight on your main antenna rope. Who
owns the utility pole?

tying off antenna; proper guy wire tying?
 

How do I tie the guy wires?

Hey OM:

I see you has 2 postings here both referring to guy.

At work on the great lakes shipping my foreman always called me guy.
He would say hey guy do this or that. So my question are those my
wires?
That you call guy?
I would use guy ropes rather than guy wire. although you can use wire
but you better has broken it up into lots of pieces.
so they doesn't resonate on the band you are operating on.

73 OT
de n8zu

I

tying off antenna; proper guy wire tying?
 

I use screen-door spring(s) at each end of my wire antennas to permit
tree/limb movement without stretching the antennas. You should be
able to buy such springs in several strengths at 'most any hardware
store (probably even WalMart or K-Mart) in the USA. If I think one
spring might not be strong enough for a particularly-heavy antenna,
I just parallel two springs.

Of course, the springs are between the antenna insulators and the
ropes used to pull/tighten the antennas.

If you do use weighted buckets, be sure to tie ANOTHER rope to the
bucket and a nearby limb so the bucket won't fall on someone's head
if the antenna rope or wire breaks!

--W0PBV.