LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #28   Report Post  
Old June 8th 04, 02:17 AM
Cecil Moore
 
Posts: n/a
Default

H. Adam Stevens wrote:
when they're resonant and match the transmission line
they ain't no reflections back down the line
it's all gone to somewhere else


H., there are standing waves all over a dipole antenna.
Its traveling-wave feedpoint impedance is about 600 ohms.
Only the reflections from each end of a dipole lower the
feedpoint impedance to 50 ohms or so. The reflected current
arrives back in phase at the feedpoint and the reflected
voltage arrives back out of phase. You can thank destructive
interference for the low feedpoint impedance of a dipole.

If you don't like reflections, you don't like a dipole and
should probably try a terminated rhombic. :-)
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo Dr. Slick Antenna 198 September 24th 03 06:19 PM
Derivation of the Reflection Coefficient? Dr. Slick Antenna 104 September 6th 03 02:27 AM
Length of Coax Affecting Incident Power to Meter? Dr. Slick Antenna 140 August 18th 03 08:17 PM


All times are GMT +1. The time now is 06:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017