Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
On Sat, 03 Mar 2012 19:43:47 -0800, Jeff Liebermann wrote:
http://www.maptools.com/UsingUTM/mapdatum.html Interesting quotes from that helpful reference (with my comments in parenthesis). "In the Continental United States the difference between WGS 84 and NAD 27 can be as much as 200 meters." (I wonder how they handle the constant creep which occurs out here near the San Andreas fault line). "Every map that shows a geographic coordinate system such as UTM or Latitude and Longitude with any precision will also list the datum used on the map." (I'd change "will" to 'should' based on my experience the past two weeks on the web) "The Global Positioning System uses an earth centered datum called the World Geodetic System 1984 or WGS 84." (That's what I prefer.) "For all practical purposes there is no difference between WGS 84 and NAD 83." (Good to know.) "On a USGS topographic map ... The datum will always be NAD 27... A dashed cross in the SW and NE corners of the map gives a visual indication of the difference between the two datums." (This is good to know.) "If you are engaged in a mission that requires more [than several hundred meters] precision, then your datums should match." (Since we're siting antennas on private hilly land, we probably want two or three meters accuracy in position and a half-meter to a meter in elevation accuracy so our datums must match.) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS Kenpro elevation rotor KR 500 | Swap | |||
Freebie: PCB Etch Tanks | Homebrew | |||
FS Kenpro KR 500 elevation rotor | Swap | |||
Kenpro KR 500 elevation rotor FS | Swap | |||
Freebie ITU Books | Shortwave |