Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
On Tue, 06 Mar 2012 19:52:36 -0800, Jeff Liebermann
wrote: On Tue, 06 Mar 2012 19:14:32 -0800, miso wrote: than SPLAT, which requires compilation parameters to set the array size. Radio Mobile, at least when I read it, was stuck at 3600x3600. If you exceed that array, and note it uses a 1/3 arc second grid, the program interpolates. I'm too lazy to check the numbers right now. Maybe tomorrow. Meanwhile, this article claims that Splat is limited to 3600x3600 while Radio-Mobile is limited to 2000x2000. No clue at this time who's correct. Looks like the balloon trackers have the same problem with Radio Mobile Deluxe. http://showcase.netins.net/web/wallio/RMD.html "The 2000x2000 software elevation matrix limits paths to 2000km for 1000m data (30-arc second), 200km for 100m data (3-arc second) and 130km for 30m data (1-arc second)." Now, go away so I can get some work done... -- # Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060 # 831-336-2558 # http://802.11junk.com # http://www.LearnByDestroying.com AE6KS |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS Kenpro elevation rotor KR 500 | Swap | |||
Freebie: PCB Etch Tanks | Homebrew | |||
FS Kenpro KR 500 elevation rotor | Swap | |||
Kenpro KR 500 elevation rotor FS | Swap | |||
Freebie ITU Books | Shortwave |