Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Ground
". In electronic circuit theory, a "ground" is usually idealized as an
infinite source or sink for charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard. The use of the term ground (or earth) is so common in electrical and electronics applications that circuits in portable electronic devices such as cell phones and media players as well as circuits in vehicles such as ships, aircraft, and spacecraft may be spoken of as having a "ground" connection without any actual connection to the Earth. This is usually a large conductor attached to one side of the power supply (such as the "ground plane" on a printed circuit board) which serves as the common return path for current from many different components in the circuit." From: http://en.wikipedia.org/wiki/Ground_(electricity) There is wrote that all of your transmitter have "a "ground" connection without any actual connection to the Earth." Each transmitter needs " an infinite source or sink for charge". The above you know. But some of you do not know that where the voltage is there is the field electron emission. So the sink is necessary. It must not be infinite. "a large conductor" absorb the electrons from the air. So its size must be adequate to the emission. Nice Fun. S* |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ground gain on real ground | Antenna | |||
Connecting ground wire to ground rod | Antenna | |||
Safety ground versus RF ground for a 2nd Floor shack | Antenna | |||
Transforming your simple Ground Rod into a Ground Anchor : Is It Worth The Work ? - You Decide ! | Shortwave | |||
Ground Or Not To Ground Receiving Antenna In Storm ? | Antenna |