Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
On 4/21/2012 10:23 PM, Jeff Liebermann wrote:
I like to make my own diplexer/triplexer boxes. In this case, only a diplexer is needed. The Radio Shack discone antenna will (allegedly) work from 30-1300MHz. http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/2000043_PM_EN.pdf Below 30MHz is the real problem. Also, none of the commercial diplexers I could find had a 30MHz cutoff frequency. Looks like I get to build something. I have one and have never bothered to check it because I've never actually used it. It's one of my backup backup antennas. Time to test it. tom K0TAR |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FA: ICOM PCR1000 with UT-106 DSP | Shortwave | |||
FA: Icom PCR1000 | Scanner | |||
FA: Icom PCR1000 | Swap | |||
FA: ICOM PCR1000 | Scanner | |||
Looking for Icom PCR1000 | Swap |