Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 3rd 04, 11:31 PM
Dave
 
Posts: n/a
Default

another loaded vertical. more details are required to see if its another
EH, CFA, or some other variation of a standard loading arrangement.

"Chuck...K1KW" wrote in message
news:0wNvc.39192$3x.31853@attbi_s54...
Anyone know anything about the "technology" in the article below?

http://www.uri.edu/news/releases/?id=2659

Chuck...K1KW

Article text below


---------------------------------------------
Department of Communications/News Bureau
22 Davis Hall, 10 Lippitt Road, Kingston, RI 02881
Phone: 401-874-2116 Fax: 401-874-7872
--------------------------------------------------------------------------

--
----
URI physics employee invents new antenna technology
Media Contact: Jan Wenzel, 401-874-2116

KINGSTON, R.I. -- June 2, 2004 -- Rob Vincent, an employee in the

University
of Rhode Island's Physics Department, proves the adage that necessity is

the
mother of invention.

An amateur radio operator since he was 14, Vincent has always lived in
houses situated on small lots. Because he couldn't erect a large antenna

on
a confined property, he has been continually challenged over the years to
find a way to get better reception.

"I was always tinkering in the basement. Thank goodness, my parents were
tolerant. I can still remember my poor father driving up our driveway

after
a hard day's work to see wires wrapped around the house," Vincent recalls.

"The Holy Grail of antenna technology is to create a small antenna with

high
efficiency and wide bandwidth," explains Vincent. "According to current
theory, you have to give up one of the three-size, efficiency, or
bandwidth-to achieve any one of the other two."

After decades of experimentation, combined with a 30-year engineering

career
and Yankee ingenuity, Vincent has invented a revolutionary antenna
technology. The distributed loaded monopole antennas are smaller, produce
high efficiency, and retain good to excellent bandwidth. And they have
multiple applications.

With this technology it will be possible to double, at minimum, the range

of
walkie-talkies used by police, fire, and other municipal personnel. Naval
ships, baby monitors, and portable antennas for military use are other
applications. An antenna could be mounted on a chip in a cell phone and be
applied to wireless local area networks. Another application deals with
radio frequency identification, which is expected someday to replace the
barcode system.

"It could even make the Dick Tracy wrist radio with all the features, such
as Internet access, a possibility," Vincent says.

The inventor pursued his quest to build a better antenna in earnest eight
years ago when he and his significant other moved into a house situated on

a
50-foot by 100-foot lot in Warwick. There was nothing on the commercial
market that could fit the lot that would provide the performance Vincent
needed to be heard in distant lands and that would be acceptable to his
neighbors. All the small antennas being sold were inefficient and lacked
bandwidth, which resulted in low performance and high frustration.

Vincent looked at the techniques that were currently used to reduce

antenna
size and realized something was missing in the way everyone was

approaching
the problem.

He began to model various combinations into a computer program called
MathCad. His first attempt produced a 21 MHz band antenna that was 18

inches
high. Normally, antennas for this band are 12 to 24 feet high.

Vincent installed the antenna in his back yard. The legal limit that
amateurs can operate is 1,000 watts with the norm being 100 watts. The
amateur radio operator experimented with 5 to 10 watts. He reached a

station
in Chile and made contacts in various European countries. Meanwhile he

kept
adding power until it reached 100 watts. That's when things suddenly went
bad. Walking outside in the backyard, he understood why. The antenna had
melted.

After examining the molten matter, Vincent wasn't discouraged. This was

only
a small model and not designed to handle much power. The part of the

antenna
that failed proved to be the key to the design. After analyzing the

failure,
Vincent realized that he was able to transform a lot of current along the
antenna with even relatively low power.

"Antennas radiate by setting up large amounts of current flow through
various parts of their structure," he says. "The larger the current the

more
radiation and the better the output of the antenna."

Vincent went back to the drawing board and continued to improve the
technology. Relying on his nearly 30 years at Raytheon Co. and at KVH
Industries in Middletown R.I which provided him with a diversified
background in electronics and electronic systems, Vincent overcame a

myriad
of problems and succeeded.

He established three test sites for various prototypes. Antennas were

placed
in Westport, Mass. in a salt marsh, the best ground for transmission and
reception. Another set of antennas were placed on rocky ground in
Cumberland, R.I., the worst kind of site, and at a Warwick site which is

in
between the two. The antennas, which resemble flagpoles, worked well at

all
locations.

Tests confirmed that Vincent has created antennas at one third to one

ninth
of their full size counterparts. Normally smaller antennas are only 8 to

15
percent efficient. Vincent's antennas achieved 80 to 100 percent

efficiency
as compared to the larger antennas.

A patent is pending on Vincent's technology. The inventor has made the
University of Rhode Island and its Physics Department partners that will
benefit from any revenue his invention earns. "The University and its
Physics Department has been very supportive and given me time and space to
work on this project," says Vincent who was recently presented the 2004
Outstanding Intellectual Property Award by URI's Research Office. "I

couldn'
t have done this without the University's support. It's only fair that it
share in the profits."




  #2   Report Post  
Old June 4th 04, 03:44 PM
k4wge
 
Posts: n/a
Default

"Dave" wrote in message ...
another loaded vertical. more details are required to see if its another
EH, CFA, or some other variation of a standard loading arrangement.

"Chuck...K1KW" wrote in message
news:0wNvc.39192$3x.31853@attbi_s54...
Anyone know anything about the "technology" in the article below?

http://www.uri.edu/news/releases/?id=2659

Chuck...K1KW



Do you think the technology might be similar to the 160 meter indoor
antenna called the TeslaVert?

Links:

http://www.tfcbooks.com/special/lf/teslavert.htm
Werner has the device located indoors at his home and is enjoying many
QSOs on 160.


http://www.antennex.com/Stones/st0503/st0503.htm
Of particular interest was one variation of the design, for 160M, that
used a flat coil and a spherical radiator at the top. As Werner
studied the design, he started to think about the role of spherical
shapes in general Physics and noted that virtually all real shapes,
and shape models found in the universe are spheres or derivatives! So,
Werner concluded why not use spheres for experiments with capacitive
radiators? And why not see what could be learned about the
superposition of fields, by using these shapes?


Here's a cite to a fractal sphere antenna:

Facchine, M.J.; Werner, D.H.; "Electromagnetic scattering from fractal
spheres", Antennas and Propagation Society International Symposium,
2002. IEEE , Volume: 3 , 16-21 June 2002 , pp. 106 -109.

Image of fractal sphe

http://www.fractal-dome.de/3dg4.shtml
  #3   Report Post  
Old June 5th 04, 02:42 PM
Yuri Blanarovich
 
Posts: n/a
Default


Do you think the technology might be similar to the 160 meter indoor
antenna called the TeslaVert?


What a disservice to the great name of Tesla.
Using loading coild to shorten the antenna and slap Tesla name on it to make
"waves" in Antennex (BS) "magazine"?
Yea spherical top is universe "invention". I got the copper toilet bowl float
on the top of my vertical to prevent corona and add some top loading and
broadbanding.
Brace yourself for more "inventions" to come as we get flooded with more of
un-knowledgeable hams.
Hey, maybe there is a room to sell wunderantennas to idiots?
I have 50 ohm DC to light 100% efficient, fits in a pocket miniature antenna
for $100. (Secret? it is made by Ohmite) There is another one produced by GE or
Phillips in China and it even provides light when power applied to it. You can
use it as a lightbulb too.
I will share my profits with US gubermint.

Yuri, www.k3bu.us
www.computeradio.us home of Dream Radio One

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Mobile Ant L match ? Henry Kolesnik Antenna 14 January 20th 04 04:08 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 12:40 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017