While trying to fix a minor problem on my vertical... I accidentally
broke the threaded coupler between the bottom of the 75/80 meter
resonator and the top of the lower section is screws into this coupler
is now broken off 1/2 in the resonator the other 1/2 in the lower
mating section. At first I assume I could use like an "easy out
and turn the broken pieces out of each unit. This is not the case.
the part broken in the resonator does turn easy but will not back out.
I am assuming it is some how captured and may not be a threaded item
anyway..

the part broken in the lower section I can not even get it to break
loose and turn it..

I have though about using a drill and tap on both sections and then
use a thread rod about 1 to 1.5 inches long ..

any ideas? am I missing something? any ideas and or fixes would sure
be appreciated very much!!

thanks

Dan