Thanks for the link, I see all the Ringo dimensions for single band antenna.
I don't have that trap or other parts that would allow for dual bands.

Other than lots of hours of testing, some serious testing, has anyone had
any success with the full wave 2m antenna at 6ft 4"? Will that also be
somewhat acceptible for 440 mhz Receiving only?

Some of the Ringo have the ground planes and some don't. Since I have them
should I implement them or would they have adverse affects? What length?

Thanks

73s



"Fred McKenzie" wrote in message
...
In article ,
"Tom" wrote:

Ok

I just bought at some flea fest an old style Ringo style CB antenna with
the
ring on the bottom for matching tune. Also has the ground planes and
bracket
for them and the aluminum antenna looks about 20 feet long (in sections)
and
about 8 foot ground planes (4 total).

What I would like to do is make a 2m full wave antenna out of it. It
looks
real solid at about 6ft 4inches long with or without its gnd planes. I
was
thinking of using it at this length on a 45 foot tower at the top. I was
thinking of wrapping the coax about 8 times at the top for RF reasons or
matching reasons.

Any ideas why i shouldn't or should or any tips?

Tom-

You can probably use the materials from the CB Ringo to make a 2m
equivalent. I think you can even find dimensions of the various Ringo
versions if you search the Cushcraft web site
http://www.cushcraftamateur.com/prodsupport.php. Ringos are the "AR"
models.

Fred
K4DII