RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Antenna (https://www.radiobanter.com/antenna/)
-   -   Wanted: Boonton 91-B Schematic (https://www.radiobanter.com/antenna/202260-wanted-boonton-91-b-schematic.html)

amdx[_3_] March 23rd 14 02:17 PM

Wanted: Boonton 91-B Schematic
 
Hi guys,
I'm looking for the schematic of a Boonton 91-B RF Voltmeter.
I can find many other 91 series schematics but not the 91-B.
It would make my job easier with the correct schematic.
Any leads?
Thanks, Mikek

P.S. To Jeff, This is a tube model, I heeded your advice, I'm using an
isolation transformer.

problem; I have one calibration pot (1V range) that has very little
effect. The others have about a 30% range, this one maybe 1%.

Phil Allison[_2_] March 24th 14 12:03 PM

Wanted: Boonton 91-B Schematic
 

"amdx"

P.S. To Jeff, This is a tube model, I heeded your advice, I'm using an
isolation transformer.


** ROTFL !!

Wot simple faith in an idiot's advice.

No iso tranny is gonna save a fool like you from death by electrocution.





..... Phil



John S March 24th 14 01:16 PM

Wanted: Boonton 91-B Schematic
 
On 3/23/2014 9:17 AM, amdx wrote:
Hi guys,
I'm looking for the schematic of a Boonton 91-B RF Voltmeter.
I can find many other 91 series schematics but not the 91-B.
It would make my job easier with the correct schematic.
Any leads?
Thanks, Mikek

P.S. To Jeff, This is a tube model, I heeded your advice, I'm using an
isolation transformer.

problem; I have one calibration pot (1V range) that has very little
effect. The others have about a 30% range, this one maybe 1%.


Hi, Mike -

Would a 91CA schematic help? If so, then...

http://bama.edebris.com/manuals/boonton/91ca/

amdx[_3_] March 24th 14 02:03 PM

Wanted: Boonton 91-B Schematic
 
On 3/24/2014 8:16 AM, John S wrote:
On 3/23/2014 9:17 AM, amdx wrote:
Hi guys,
I'm looking for the schematic of a Boonton 91-B RF Voltmeter.
I can find many other 91 series schematics but not the 91-B.
It would make my job easier with the correct schematic.
Any leads?
Thanks, Mikek

P.S. To Jeff, This is a tube model, I heeded your advice, I'm using an
isolation transformer.

problem; I have one calibration pot (1V range) that has very little
effect. The others have about a 30% range, this one maybe 1%.


Hi, Mike -

Would a 91CA schematic help? If so, then...

http://bama.edebris.com/manuals/boonton/91ca/


Ya, I've checked that one, there seems to be to much difference
for me to trace it out.
Thanks, Mikek


All times are GMT +1. The time now is 04:03 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com