Jimmy wrote:
I hope this is a wifes tale that has long been discredited. Trimming cable
changes the impedance seen by the transmitter with no change to SWR.

However, a 50 ohm SWR meter reading will change as one changes the
length of the ladder-line. When the 50 ohm SWR meter reads 1:1,
the transmitter is seeing 50 ohms. That's how I tune my dipole.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----