| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
"rickman" wrote in message ... Why is a guyed ladder a "Rube Goldberg contraption"? All that matters is the strength of the materials and the mechanics of the design. I expect a ladder designed to carry 250 lbs of person to be more than up to the task of holding a 15 lb antenna. Likely much more so than most of the antenna towers that would be used for similar applications. For short time usage such as field day I am sure it is ok. For long term usage at home I don't think I would do it with a very large antenna. Ladders are designed to lay on a wall at a certain angle. That is why the legs are sort of an I beam type of construction. They are not made to take sideways torque like a large beam would put on with the wind load. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 75 ft tilt over/ fold over HD tower w/ rotor | Swap | |||
| Ferrite Rod AM/MW Antennas : To Tilt ? -or- Not to Tilt ? {What's TheDifference... If Any ?} | Shortwave | |||
| WTD Crankup Tilt over tower | Equipment | |||
| WTD Crankup Tilt over tower | Equipment | |||
| FS: 40 foot crank up tilt-over tower, Antenna and rotor | Swap | |||