About Us

John S · October 10th 14, 08:26 PM posted to rec.radio.amateur.antenna

On 10/10/2014 1:50 PM, wrote:
John S wrote:
The thread about a new philosophy was about 246 posts long including the
drift into mechanisms of photons and quarks.

I wish to start this thread by discussing the merits of dipoles with
respect to length. I really don't want to start another thread of
flames. Please help me do this.

Let's confine the discussion to...

* It is a wire dipole (keep the wire AWG to practical values, please).
* The dipole's length is variable.
* It may or may not have wire resistance (state your value).
* The source is placed at the center of the antenna.
* There is no transmission line.
* There are no matching devices.
* This is a theoretical discussion but may include practical parameters.

EZNEC or NEC, provides answers to these questions, I think. I will do
some modeling and I'd like to compare my results to other results.

It does.

Let's kick them around.

There is nothing to kick around unless you want to argue about whether
the various NEC implementations provide valid results.

No. I do not want to argue. If you do not want to participate, please
feel free to not post in this thread. I'm sure that your knowledge will
be gratefully accepted when you post if you can do so in a gentlemanly
manner.

What NEC will tell you is that as the .5 wave dipole gets shorter and
shorter, the resistive part of the antenna impedance decreases and the
capacitive part increases and the patern and maximum gain changes very
slightly.

Not concerned about the pattern.

As the ratio of resistive input impedance to the wire resistance get
smaller, the I^2R losses increase.

Yes, of course. Which changes faster?

But don't let that stop you from doing it.

I have never let other people's opinions stopped me from exploring and
learning.

People often learn much better from actual doing then they do from lectures.

True. Today, however, it is nice to be able to explore so many
configurations without spending a lifetime of climbing trees or erecting
support poles or installing towers, or....

BTW, you have to pay some attention to segmentation and as you get smaller
and smaller the segmentation limits just how accurate the simulation is.

I know how that is done. Is this information for me or the other readers?

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Oil Drillers Discuss MC 252	dave	Shortwave	2	May 15th 10 10:24 PM
Discuss about books	chandru	Shortwave	0	July 12th 08 11:34 AM
OT , You may need to discuss this .	[email protected]	CB	2	November 30th 07 12:51 AM
Anyone care to discuss...	Professor	CB	11	April 23rd 05 07:35 PM
Art Bell to discuss BPL on C-to-C AM TONIGHT (??) 3/20/04	Jim Hampton	Policy	0	March 20th 04 10:59 PM

Menu

About Us