Let's design a short antenna just for fun
 

On Wednesday, November 5, 2014 2:04:29 PM UTC-6, wrote:

My usual 11 ft 80-10m mobile antenna in the driving mode is exactly
center loaded. The coil bottom is at the 5 ft point,

Hummm, that is wrong. The base of the coil is at the 6 ft level,
not 5..

Let's design a short antenna just for fun
 

Let's design a short antenna just for fun
 

On Wednesday, November 5, 2014 2:16:04 PM UTC-6,
There is little practical reason for shortning 23 cm band antenna,
but antennas for 160M are a challenge for most people that live
in an urban area.

Where I live anything over about 30 feet tall is basically a no-go.

So in the interest of practicallity and maybe getting something usefull
out of it, how about a 160M antenna with a maximum height of 30 feet
as a goal?

That immediately eliminates dipoles as a 160M dipole at 30 feet will
radiate most of the power straight up.

In that case, I'd use a "T" vertical, with the loading coil at the base
if the top wires are too short to tune the antenna. The main reason
for having the coil at the base is ease of changing the inductance,
and the top hat wires improve current distribution vs a whip with
no top wires. If no room for the top wires, I'd use a capacity hat if
possible.

Let's design a short antenna just for fun
 

On 11/5/2014 1:32 PM, rickman wrote:
On 11/5/2014 2:02 PM, wrote:
On Wednesday, November 5, 2014 12:33:48 PM UTC-6, John S wrote:


Can you tell us how big would it be? And what about the coil dimensions,
losses? Can you do an EZNEC model so those of us who have the simulator
can look at all the parameters/arguments?

It can be any size one wants. The bigger the better of course..

What? Maybe you don't fully grasp the idea of a "short" antenna? ;-)


Rickman, please. Is that the tact a Gentleman would use? It seems that
your comment may be designed to invoke an ungentlemanly response. This
is exactly the sort of response I was hoping to avoid. I beg you to be a
bit more tactful.

For example "Well, of course, but what do you, personally, consider is a
short antenna?"

Let's design a short antenna just for fun
 

On 11/5/2014 1:43 PM, wrote:
On Wednesday, November 5, 2014 1:33:06 PM UTC-6, rickman wrote:
On 11/5/2014 2:02 PM, wrote:
On Wednesday, November 5, 2014 12:33:48 PM UTC-6, John S wrote:


Can you tell us how big would it be? And what about the coil dimensions,
losses? Can you do an EZNEC model so those of us who have the simulator
can look at all the parameters/arguments?

It can be any size one wants. The bigger the better of course..

What? Maybe you don't fully grasp the idea of a "short" antenna? ;-)

--

Rick

I grasp that the shorter the antenna, the worse it generally performs.
But if I use an 18 ft long dipole for 80 or 40 meters, I consider
that a short dipole. Others may disagree, but I don't care.
They can knock themselves out with shorter versions.
I try to avoid using short dipoles. My previously mentioned methods
can be used with any length dipole. The smaller, the smaller the
performance. :(
Of course, the reasons for the smaller performance are not
what he who is silly thinks are the reasons. :|

C'mon, Mark. You didn't need to add that. I think all of your technical
responses have been excellent info. Good man.

Let's design a short antenna just for fun
 

On Wednesday, November 5, 2014 2:26:23 PM UTC-6, John S wrote:


C'mon, Mark. You didn't need to add that. I think all of your technical
responses have been excellent info. Good man.

Yea, I know, but he has a way of provoking me that is hard to resist..

Let's design a short antenna just for fun
 

On 11/5/2014 1:02 PM, wrote:
On Wednesday, November 5, 2014 12:33:48 PM UTC-6, John S wrote:


Can you tell us how big would it be? And what about the coil dimensions,
losses? Can you do an EZNEC model so those of us who have the simulator
can look at all the parameters/arguments?

It can be any size one wants. The bigger the better of course..
And all the other parameters can be adjusted also.. You use what
you can get away with to fit the room you have.
I don't recall having any mobile whips modeled, but it's hard to
say as all the older designs I did are on older unused hard drives
and I don't have ready access to them. I had to re-download quite
a few programs due to that reason.. I change drives quite often.
I just added two more 2 TB drives about a month ago.. I have several
TB these days.

All of Reg's old software can still be downloaded.
http://zerobeat.net/G4FGQ/page3.html#S301%22
Vertload was one I used a lot for playing "what if" when designing
mobile whips and other short verticals, and the info can easily
be used for small dipoles. There are others programs that can be
handy also.

It's been a long time since I used it, but I believe vertload
can be used to locate the best location on the whip to place
the loading coil. In general, you want it as far out to the ends
as possible for the best current distribution, but there is a
point where coil losses start to outweigh the improved current
distribution. So in the real world, the best location is usually
appx 3/4 the way out from the feedpoint, plus or minus.

And the use of capacity hats further improve current distribution,
and slightly reduce the number of turns needed for the loading
coil. A short dipole is never going to be quite as good as a full
size version, but with proper design you can come up with quite a
respectable antenna given the dinky size.



John (who was KD5YI but will be N1JLS in a few weeks due to vanity)

Hummm.. You now in 1 land, or you just grabbing an old call?
My current call is a vanity call, which I think I've had since '96.
I was WD5CJL in a past life.. I got that call in 77 when I was 20.

Grabbing an unused call sign. Don't know exactly why. My initials are
JLS and I thought N1 would be Number 1! So that would make me Number 1
John L Smith. How vain is that?

I actually got into ham radio when I was in the eighth grade, learned
the code, and even built a 6v6 transmitter from junk parts.

Woo hoo! Me, too. Mine was a 6L6. First contact from Dallas in the
middle of the day was Oklahoma City on a wire dipole. CW of course.

Got my ticket in 1957 while in high school. KN5SIW. I still have the
paper license the FCC gave me. In those days you had to upgrade within a
year or loose it, so I became K5SIW.

But then I got lazy and kind of got out of it a while, and didn't
actually get a ticket. Later on I got back into it, and got a ticket about
six years later. I used my first 6v6 transmitter when I was a novice in 77.
I was a SWL for a good while before I got into ham radio.
I worked a lot of CW back in the old days. I got up to nearly 60 wpm
at one point. But due to lack of activity the past several years, I can't
do near that now. :(

I never made it to more than about 15 or so WPM. Family and career took
precedence. I doubt I could do 5 WPM now. Lack of activity. But, there
is still something I like about code, and I don't understand what it is.

Let's design a short antenna just for fun
 

wrote in message
...

Yea, I know, but he has a way of provoking me that is hard to resist..


How does speaking the truth provoke you?

Let's design a short antenna just for fun
 

On 11/5/2014 2:32 PM, wrote:
On Wednesday, November 5, 2014 2:26:23 PM UTC-6, John S wrote:


C'mon, Mark. You didn't need to add that. I think all of your technical
responses have been excellent info. Good man.

Yea, I know, but he has a way of provoking me that is hard to resist..

Please, Mark. Try.

Let's design a short antenna just for fun
 

On Wednesday, November 5, 2014 2:35:40 PM UTC-6, John S wrote:
On 11/5/2014 1:02 PM, wrote:
On Wednesday, November 5, 2014 12:33:48 PM UTC-6, John S wrote:


Can you tell us how big would it be? And what about the coil dimensions,
losses? Can you do an EZNEC model so those of us who have the simulator
can look at all the parameters/arguments?

It can be any size one wants. The bigger the better of course..
And all the other parameters can be adjusted also.. You use what
you can get away with to fit the room you have.
I don't recall having any mobile whips modeled, but it's hard to
say as all the older designs I did are on older unused hard drives
and I don't have ready access to them. I had to re-download quite
a few programs due to that reason.. I change drives quite often.
I just added two more 2 TB drives about a month ago.. I have several
TB these days.

All of Reg's old software can still be downloaded.
http://zerobeat.net/G4FGQ/page3.html#S301%22
Vertload was one I used a lot for playing "what if" when designing
mobile whips and other short verticals, and the info can easily
be used for small dipoles. There are others programs that can be
handy also.

It's been a long time since I used it, but I believe vertload
can be used to locate the best location on the whip to place
the loading coil. In general, you want it as far out to the ends
as possible for the best current distribution, but there is a
point where coil losses start to outweigh the improved current
distribution. So in the real world, the best location is usually
appx 3/4 the way out from the feedpoint, plus or minus.

And the use of capacity hats further improve current distribution,
and slightly reduce the number of turns needed for the loading
coil. A short dipole is never going to be quite as good as a full
size version, but with proper design you can come up with quite a
respectable antenna given the dinky size.



John (who was KD5YI but will be N1JLS in a few weeks due to vanity)

Hummm.. You now in 1 land, or you just grabbing an old call?
My current call is a vanity call, which I think I've had since '96.
I was WD5CJL in a past life.. I got that call in 77 when I was 20.

Grabbing an unused call sign. Don't know exactly why. My initials are
JLS and I thought N1 would be Number 1! So that would make me Number 1
John L Smith. How vain is that?

No more than mine, which the M and the K are my initials.
I really wanted W5MK, and I was going to grab it as the guy
lived here locally, and I knew he went SK. But I had to wait
2 years, and when it come up for grabs, I had forgot about it,
and someone else hopped on it. But I much prefer what I have now,
vs my old call. Many used to confuse the L for an O on phone,
and the new call is lickity split fast on CW vs the old call.