On 7/9/2015 9:14 AM, Ralph Mowery wrote:
"Jeff" wrote in message
...

The SWR has to be the same at any point on the coax or transmission line
minus the loss in the line. A simple swr meter may show some differance
because of the way that kind of meter works. By changing the length of
the
line , the apparent SWR may be differant at that point.

There is no such thing as apparent SWR. It is what it is in a given
place.


By 'apparent SWR' he means as indicated SWR on the meter, and yes it can
change at various point on the line due to inadequacies in the meter; the
'real' VSWR will of course remain the same at any point on a lossless
line.

Jeff

That is what I mean Jeff. If there is any SWR, by changing the length of
the line, the voltage/current changes in such a maner that at certain points
you may get a 50 ohm match at that point.

https://en.wikipedia.org/wiki/Standi...dance_matching

"if there is a perfect match between the load impedance Zload and the
source impedance Zsource=Z*load, that perfect match will remain if the
source and load are connected through a transmission line with an
electrical length of one half wavelength (or a multiple of one half
wavelengths) using a transmission line of any characteristic impedance Z0."

This wiki article has a lot of good info in it. I have seen a lot of
stuff posted here that this article directly contradicts.... I wonder
who is right?

--

Rick