Antenna Switch
 

Can anyone recommend a good antenna switch? I've got 3 antenna's
going into one BNC connector. Don't need anything fancy. Just a
switch and three ports. Thanks

"William H. Everhart III" wrote in message
...
Can anyone recommend a good antenna switch? I've got 3 antenna's
going into one BNC connector. Don't need anything fancy. Just a
switch and three ports. Thanks

Well, I haven't found one I like, but I can dis-reccomend MFJ.
I've had a couple of theirs, where the connectors FELL OFF.
They are just pressed in.

What bands is this for? The answer for 440 will be different than for 160.

--

KC6ETE Dave's Engineering Page, www.dvanhorn.org
Microcontroller Consultant, specializing in Atmel AVR

"William H. Everhart III" wrote in message
...
Can anyone recommend a good antenna switch? I've got 3 antenna's
going into one BNC connector. Don't need anything fancy. Just a
switch and three ports. Thanks

William

I have recently made some pretty good "coax" switches for low power VHF
using TO5 relays. I have also made some decent toggle switchs for 2 meters
with miniature microswitches.

If you have interest in building your own, E-mail me for pictures.

Jerry

If you can find one on EBAY or some trading page look for a Daiwa CS-401.
This would handle 4 antennas from 0-1300 MHz.

73 Richard WB8KRN


"William H. Everhart III" wrote in message
...
Can anyone recommend a good antenna switch? I've got 3 antenna's
going into one BNC connector. Don't need anything fancy. Just a
switch and three ports. Thanks