"highlandham" wrote in message ...

snip

What strikes me in this newsgroup thread , time and again, is that MFJ´s
quality control people (if they exist) pass badly soldered PCBs and
other imperfections which affect their products´ reliability . But for
some reason they get away with it. To me this seems to be an attitude
brought about by management.........Martin F. Jue ?

Frank , GM0CSZ / KN6WH

================================================== =======

I picked up an MFJ "Deluxe Versatuner" at a ham swap meet. I opened it at
home to give it some poking and prodding. I quickly discovered that most of
the hardware need to be tightened or retightened -- if it was ever tight.
This reminds me to open it again. It's been a few years. :-)

"Sal" (really KD6VKW)