Home |
Search |
Today's Posts |
#18
![]() |
|||
|
|||
![]() wrote in message ... In rec.radio.amateur.antenna Wayne wrote: "rickman" wrote in message ... On 2/29/2016 1:42 PM, gareth G4SDW GQRP #3339 wrote: "Wayne" wrote in message ... "gareth G4SDW GQRP #3339" wrote in message ... "Wayne" wrote in message ... There has previously on the newsgroup been a claim that shortness makes inefficiency. To that I say that if for example, 100 watts is fed to a resonant HF dipole, and 100 watts is fed to a 1 foot long dipole, both radiate 100 watts. Different patterns, but the power radiated is the same, if you manage to successfully get the power to the antenna. The ratio of radiation resistance to ohmic resistance will give the lie to your claim. In my claim, equal power arrives at the long or short antenna AFTER the ohmic resistances have already occurred. I don't know what you mean by that. The Ohmic resistances to which I referred were those of the antenna rod itself. # All practical antenna have ohmic resistance. None are perfectly # efficient. You can design any antenna to have any efficiency you wish # by using suitable materials even if you have to use superconductors. I gave up. If we are talking about theoretical antennas, they are lossless. # Theoretical antennas have whatever loss you assign to them. And lossless is a good way to get down to basics. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antennae and the FT-450D | Antenna | |||
Long antennae for LF and VLF? | Antenna | |||
The inefficiency of short antennae compared to long antennae, as previously discussed. | Antenna | |||
Top Band Antennae? | Antenna | |||
Homemade Antennae, help | Antenna |