| Home |
| Search |
| Today's Posts |
|
#1
August 13th 03, 11:43 PM
|
|||
|
|||
Coax Cable vs Freqency
where does that come from?
"Reg Edwards" wrote in message ... For anyone who may be interested. Typical of RG-58 and RG-11 type cables. Zo = Ro - jXo Xo is always negative. Angle of Zo in degrees. Always negative. VF = relative velocity. Freq Ro jXo Angle VF ------ ------ ------ ------ ------ 50 Hz 967 -965 -44.95 0.034 1 kHz 220 -213 -44 0.151 10 kHz 80 -58 -36 0.41 100 kHz 56 -9.3 -9.5 0.59 1 MHz 52.4 -2.4 -2.7 0.63 10 MHz 50.7 -0.76 -0.86 0.65 100 MHz 50.2 -0.23 -0.27 0.66 Smith Chart calculations begin to be inaccurate around 2 MHz and below. So do SWR meters. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Matching 70 cm Yagi to coax feedline | Antenna | |||
| Length of Coax Affecting Incident Power to Meter? | Antenna | |||
| Old coax | Antenna | |||
| 50 ohm or 75 ohm cable foe dipole? | Antenna | |||
| Feeding two Yagi's from One Coax. | Antenna | |||
Threaded Mode
