Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
On Tue, 11 Jan 2005 03:30:07 GMT, ml wrote:
what would happen if i build say i'd have to stay physically small , so say a 1/4wave verticle on 10m and then made that antenna supercondutive? Hi OM, As far as performance? Absolutely no difference to it even if it were elevated 1000°F above that to compare. - Well maybe someone with enough sophisticated equipment might notice a dB difference - then they would whack the side of the gear to clear that up - nope, no difference.... You need to come to terms with just how imperceptible 1 dB is (zilch, in technical terms), and how much power it takes (about 12%, just more $ to burn) to make that imperceptible difference. The dollar has lost 30% of its value in the world market in the last few years - have you noticed? This may not be one way to appreciate 1dB, but it does reveal how relative changes go unfelt. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Yaesu FT-857D questions | Equipment | |||
Mobile Ant L match ? | Antenna | |||
EH Antenna Revisited | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna |