| Home |
| Search |
| Today's Posts |
|
|
|
#1
January 11th 05, 01:30 PM
|
|||
|
|||
ANyone build a corner reflector for uhf
I have seen designes for tv antennas but wondered if they would work
well for uhf? |
|
#2
January 11th 05, 02:04 PM
|
|||
|
|||
|
wrote:
I have seen designes for tv antennas but wondered if they would work well for uhf? http://www.cebik.com/corn1.html http://www.cebik.com/crn.html -- Jim Pennino Remove -spam-sux to reply. |
|
#3
January 11th 05, 03:13 PM
|
|||
|
|||
|
wrote in message
ups.com... I have seen designes for tv antennas but wondered if they would work well for uhf? Yes, Arrow antennas makes corner reflectors for 2 meters, 220 MHz and 70 cm amateur bands. Here is a dual band unit http://www.arrowantennas.com/cb450.html gb |
|
#4
January 11th 05, 11:35 PM
|
|||
|
|||
|
wrote in message ups.com... I have seen designes for tv antennas but wondered if they would work well for uhf? Yes, they will work. They are just usually larger for the same gain than other antennas. One advantage is the same reflector can be used for several bands. |
|
#6
January 13th 05, 12:17 AM
|
|||
|
|||
|
wrote in message oups.com... How is "the same reflector can be used for many bands?" The driven element is a dipole and you use a seperate dipole for each band. The spacing of the dipole from the reflector depends on frequency . |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| An easy to build SSB transceiver | Homebrew | |||
| VHF Broadband balun 4 to 1 ratio..(50 and 144 mhz)..maybe even up to 440? how to build one? | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
| I need help to build a Microphone preamp | Homebrew | |||
| whant to build Microphone preamp | General | |||
Hybrid Mode
