Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Dr. Slick" wrote in message om... Hi, I recently tuned up a VHF dipole, and i got a double-dip, double resonance for the swr, and also the minimum swr was around 1.3:1 At what two frequencies? What construction, feed type...? What method of measurement and equipment type/numbers? First, let's determine if there even is a problem with the antenna... I did some modifications, and the double resonance was was gone, plus the swr was down to less than 1.1:1 What mods? 73, -- Steve N, K,9;d, c. i My email has no u's. I'm certain that one of two things (or a combo of both) did the trick, but i wanted to see if any of you seasoned antenna boys could guess what the problem was. Thanks for your input! Slick |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
40 meter dipole or 88 feet doublet | Antenna | |||
FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna | |||
Bricks effect in dipole resonance? Help! | Antenna |