On the suggestion of Ian White, G3SEK, program SELFRES2 has been modified by
the addition of an extra operating facility.

The terminating impedance at the other end of the line from the coaxial
choke, which was fixed at 20 ohms, can now be varied between 1ohm and 1000
ohms from the keyboard.

The name has been changed to SELFRES3 and is now available from website
below. If you have already downloaded the earlier version which is no longer
available, overwrite it with SELFRES3.
----
.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........

Reg Edwards wrote:

On the suggestion of Ian White, G3SEK, program SELFRES2 has been modified by
the addition of an extra operating facility.

The terminating impedance at the other end of the line from the coaxial
choke, which was fixed at 20 ohms, can now be varied between 1ohm and 1000
ohms from the keyboard.

The name has been changed to SELFRES3 and is now available from website
below. If you have already downloaded the earlier version which is no longer
available, overwrite it with SELFRES3.
----
.................................................. .........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. .........



Thanks Reg. As a programmer of the older sort, I appreciate the effort.
Seems to operate well.

tom
K0TAR