Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Gary -
Look at these web sites. L.B. Cebik, W4RNL basics on the HB9CV antenna. The HB9CV version of the 2-element phased array appeared in 1961. In Europe, some writers refer to almost any 2-element horizontal phased array as an HB9CV, while the English-speaking world tends to refer to the ZL- Special to mark the genre of antenna. The HB9CV version of the antenna and many variants are widely used in Europe, with Christmas tree stacks for 20- 15-10 meters. Users swear by them, claiming near to, and sometimes better than, 3-element Yagi performance. http://www.cebik.com/hb.html There are a number of "copies" and homemade versions of this antenna on the market http://www.page.sannet.ne.jp/ja1hwo/...4elhb9cv_e.htm http://www.alfa-tango.com/ant/hb9.php4 Make sure that the former owner did not "modify" this antenna http://davidkearns.co.uk/G8TTI/HB9CVdetails.htm http://www.wimo.de/verteiler-e.htm?s37a_e.htm This is the 28 MHz version http://14at259.chez.tiscali.fr/hb9cva1.htm 73 de Greg w9gb -- DO NOT use Reply. Only reply through ARRL forwarding service to W9GB "Gary Morton" wrote in message ... At the recent FRARS radio rally I bough a cheap HB9CV antenna for 6m (there were no 3 element yagis on sale). When I got it home I noticed that a hole had worn in the plastic and that some bolts and spacers (for the gamma match elements - if that is the right description) had fallen out. My only concern was for the spacers to hold the "thin rods" away from the main elements. The supplier wasn't particularly helpful. I have a suspicion that the spacing may be critical, but the supplier didn't seem knowledgeable. [ SNIP ] regards... --Gary (M1GRY) |
#2
![]() |
|||
|
|||
![]()
G.Beat wrote:
Gary - Look at these web sites. L.B. Cebik, W4RNL basics on the HB9CV antenna. The HB9CV version of the 2-element phased array appeared in 1961. In Europe, some writers refer to almost any 2-element horizontal phased array as an HB9CV, while the English-speaking world tends to refer to the ZL- Special to mark the genre of antenna. The HB9CV version of the antenna and many variants are widely used in Europe, with Christmas tree stacks for 20- 15-10 meters. Users swear by them, claiming near to, and sometimes better than, 3-element Yagi performance. http://www.cebik.com/hb.html 73 de Greg w9gb Greg, thanks for the pointers. I have already used Google to do searches for information on this antenna, but some of your pages were new to me. I see that there is some software to design a HB9CV. This may be helpful in checking the antenna which I bought. regards... --Gary |
#3
![]() |
|||
|
|||
![]()
Helgina Koosmaen wrote:
....original message snipped.... As at all radio rallies - its a case of "Caveat Emptor" - Let the Buyer Beware. I don't disagree, particularly since I am still a beginner as far as antenna theory and practice goes. Can you answer any of my specific questions? regards... --Gary |
#4
![]() |
|||
|
|||
![]()
Gary Morton scribe:
At the recent FRARS radio rally I bough a cheap HB9CV antenna for 6m Good antenna if you save space and like to be better than a dipole... (there were no 3 element yagis on sale). Don't worry abt. ![]() out. My only concern was for the spacers to hold the "thin rods" away from the main elements. The supplier wasn't particularly helpful. I have a suspicion that the spacing may be critical, It is. You should have a certain distance from the elements. Amount is not to critical. I did a 6m HB9CV too. I followed the advice/plan o the designer and use 5 mm plexi glass (spelling/naming??) I am interested in how I can tweak the antenna to get a better SWR reading. That's the C and the element length Am I right in thinking that the gaps between the thin rods (name please!) phasing lines ![]() and the elements is important element lengths is important, yes effect of too big, or too small, or an asymmetric gap? a gap too small will severely detune the whole system Also I was told that this antenna was about the same gain as a 3 element yagi, possibly a little better. Was this just sales talk? HB9CV: 4.2 dBi gain ~20 dB F/R period ![]() Regardless it does seem to work and I had my first QSOs using this antenna. Since I am a QRP operator I would like to get the best out of the antenna possible. Sure a nice antenna and well worth the effort regarding the size. Claus DF8GH, JN48pa htp://home.t-online.de/home/df8gh |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
When antenna tuner won't tune | Antenna |