| Home |
| Search |
| Today's Posts |
|
#4
November 20th 04, 04:13 PM
|
|||
|
|||
Hello:
Transceiver---- coax 50 ohms ------ balum 9:1 ------- randon wire of 42 meters long It is an efective antenna to 3,5 to 50 Mhz. Transceiver----- Match --------- coax 50 ohms ---------- balum 9:1 ------- random wire. Bye. Jesus. "Fred" escribió en el mensaje om... Hi all, I installed a random wire antenna of about 80 ft. Inside the shack I would like to run coax to the outside and connect it to the wire. The question is now what kind of matching transformer (UNUN) do I need to get a good match. Thanks for any answers. Fred wb6iiq |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Putting a Ferrite Rod at the Far-End of a Random Wire Antenna ? | Antenna | |||
| Random length wire antenna | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Threaded Mode
