I will be attaching a 33' folded dipole for RX (made from 300 ohm
twinlead) to the underside of my wood deck. It will be horizontal.
Does it matter if the parallel conductors are in the horizontal or
vertical plane?

Short answer: No

Think of it this way, what's the separation distance, relative to a
wavelength?
If it's less than 0.05 wavelength, then any difference is almost certainly
unobservable at any significant distance.

You won't be using metal staples though, right?

On Mon, 3 Jan 2005 10:34:21 -0500, "Dave VanHorn"
wrote:
You won't be using metal staples though, right?



Uhhhhhh. Was gonna.

ARRL tech dep't once told me that I could use metal staples on 1000
watt, 450 ohm ladderline. Figured this was the same thing. How much
coupling can a skinny, short staple every 32" inject on a 33 ft RX
antenna?

What are my options, other than staples or those old twinlead
standoffs?

Ken KC2JDY


Ken
(to reply via email
remove "zz" from address)

Ken,
Your original post said for "RX" receive purposes,
so staples or no staples would make about as much
difference as the color of the deck...
'Doc