LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old August 23rd 03, 04:34 PM
Dave Shrader
 
Posts: n/a
Default

Ken Bessler wrote:

[SNIP]

EZNEC not only shows a differant resonance point (3.2:1 @ 9.5 mhz
with Z=19.81 - j 24.27 ohms) but shows a tighter bandwidth.


Ken, 19.81 - j24.27 IS NOT Resonant!!!

Resonant would be: 19.81 + j0 !!!! Get rid of the reactance!!

DD, W1MCE

I can not, however, deny that the antenna works. Again last night
I listened in on the 40 meter 3905 century club net and I was hearing
stations all over. I later moved to WWV @ 5 mhz and heard WWVH
just as strong as WWV (60 miles away).

Now if I could just figure out how to model the 6 turn choke at the
feedpoint...... I'd be happy to e-mail anyone my antenna file if they
would like to modify it. The wires are done and I think I got the feed-
line right but I'm not sure. Then there is the choke - 6 turns of rg8x
@ 2-5/8" dia at the feedpoint with 11 feet of rg8x going from there
to my Z11 tuner.

Any help?

Ken KG0WX



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dipole connected to grounded receiver? Tom Antenna 4 July 22nd 03 11:19 PM
Dipole questions Raphael Clancy Antenna 5 July 18th 03 06:12 PM


All times are GMT +1. The time now is 09:14 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017