| Home |
| Search |
| Today's Posts |
|
#1
October 3rd 03, 03:54 PM
|
|||
|
|||
Quarterwave line
What would be the best way to adjust a quarter wave of 75 Ohm twin
line using an antenna analyser? I just connected mine across the analyser (open circuit) and looked for the freq where a short showed - is that likely to be accurate? At 10.1 MHZ I ended up with a 15.7 foot line which seems a bit short (low velocity factor). 73 Richard G3CWI |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Complex line Z0: A numerical example | Antenna | |||
| A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
| Re-Normalizing the Smith Chart (Changing the SWR into the same load) | Antenna | |||
| Length of Coax Affecting Incident Power to Meter? | Antenna | |||
Threaded Mode
