Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
ml wrote:
does anyone know of a place where i can get a right angle wall feed thru w/so-239 connectors?? thanks How about RG-8 or variants with connectors on both ends! Goes around corners very nicely! Irv Ve^BP -- -------------------------------------- Diagnosed Type II Diabetes March 5 2001 Beating it with diet and exercise! 297/215/210 (to be revised lower) 58"/43"(!)/44" (already lower too!) -------------------------------------- Visit my HomePage at http://members.shaw.ca/finkirv/index.html Visit my Baby Sofia website at http://members.shaw.ca/finkirv4/index.htm Visit my OLDTIMERS website at http://members.shaw.ca/finkirv5/index.htm -------------------- Irv Finkleman, Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP Calgary, Alberta, Canada |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
New scanner feed on line. . | Scanner | |||
Horizintal loop with two feed points? | Antenna | |||
Methods for ladder line feed on rotatable antenna? | Antenna | |||
70 ohm dipole to 50 ohm feed line question | Antenna | |||
Take off angle | Antenna |