| Home |
| Search |
| Today's Posts |
|
#11
February 27th 05, 04:24 AM
|
|||
|
|||
Ken Smith wrote:
At the point where it fails, the output goes to zero, I assume. If so, wouldn't that be the impedance as I've been defining it. Is an amp that fails at one minute with 100w FM better matched than an amp that fails at two minutes with 100w CW? -- 73, Cecil http://www.qsl.net/w5dxp ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Discone antenna plans | Antenna | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
| X-terminator antenna | CB | |||
| Outdoor Antenna and lack of intermod | Scanner | |||
Threaded Mode
