Home |
Search |
Today's Posts |
#11
|
|||
|
|||
In article , gwhite wrote:
[...] Here's the original quote [Ken]: "When the correct matching is done, the antenna works as an impedance mathcing network that matches the output stages impedance to the radiation resistance." Yes, I stand by and have just in another part of the thread once again explained that indeed the impedance is matched. ie: If you make a small change in the impedance in any direction the power decreases. Increasing the resistance is the obvious one. The other three are because the protection circuits act. The OP had a completed transmitter he was connecting to a length of wire. -- -- forging knowledge |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Discone antenna plans | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
X-terminator antenna | CB | |||
Outdoor Antenna and lack of intermod | Scanner |