master amps?
 

just wondering if anyone had any knowledge of the blounder tongue tv
master at amp-- it's used in my 13story apt building

I can't read the model number looks like it must be at least a few
yrs old by guess

how are they hf interference wise?? I put a ice tvi filter in front of
it but still get a little tvi on 20m on older tvs and a ton on 10(all
sets)


think an additional filter after the amp might help


would replacing the amp w/a newer /better one help ?

any tips suggestons appreciated just looking to see if anyone has
experience w/this



tnx

how are they hf interference wise?? I put a ice tvi filter in front of
it but still get a little tvi on 20m on older tvs and a ton on 10(all
sets)

think an additional filter after the amp might help

Might also try filtering the AC power line cords. It's not unusual
for TV sets to suffer from RF incursion through the power supply.
Adding a ferrite or two to each set (one on the power cord, on as a
common-mode choke for the coax from the distribution amplifier) as
close as possible to the set may help.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!