Home |
Search |
Today's Posts |
#1
|
|||
|
|||
EZNEC Model of 88ft doublet
I downloaded the demo of EZNEC4 to see what it would show for a 88ft
doublet 50ft in the air fed by 300ohm twinlead. My model has two wires each 44ft long joined in the middle at 50ft elevation with another wire pair 0.1ft long 0.1ft of elevation. They are joined by two 300ohm transmission lines and a split current source is placed at the 0.1 elevation junction. When I run the SWR plot it shows over 100:1 with minima near 2:1 at 6.5Mhz and 11.75Mhz. Does this sound about right or am I not modeling it correctly? tnx jtm |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone have an EZNEC Windom Model | Antenna | |||
EZNEC Model of a Terminated Vee-Beam | Antenna | |||
G5RV or 135 foot doublet or Carolina Windom? | Antenna | |||
EZNEC v. 4.0 at Dayton | Antenna | |||
Eznec modeling loading coils? | Antenna |