LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old November 10th 03, 07:06 PM
Jim Kelley
 
Posts: n/a
Default


"Roy Lewallen" wrote in message
...
I did read what you said. You said that it wouldn't exhibit a phase
shift if placed at a current maximum. The current at the base of a short
vertical antenna is at its maximum there. So now if you're saying that
it *won't* exhibit a phase shift if placed at the base of a short
antenna, let's try this.


Naturally, the inductance of the coil and the resistance of the circuit
determine how much of a phase shift there will be. But the amount of
resulting change in current magnitude will depend on where on the cosine
curve this shift occurs. A 10 degree phase shift from 40 to 50 degrees
generates almost an order of magnitude greater change in current that it
does shifting from 0 to 10 degrees. Obviously, the closer the center of
the coil is to zero (or 180) degrees, the smaller the resulting differential
in current across the coil.

73, Jim AC6XG



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Smith Chart Quiz Radio913 Antenna 315 October 21st 03 05:31 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM
Eznec modeling loading coils? Roy Lewallen Antenna 11 August 18th 03 02:40 AM


All times are GMT +1. The time now is 01:11 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017