Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I am contemplating running a wire, a part of a 160m antenna, along the
surface of my house where it may be touched by people and animals. To prevent accidental burning or shocks from RF the wire would at least need to be insulated and preferably even enclosed in a plastic conduit, or tube, with sufficient spacing from the wire to the conduit surface. This would have to be safe for all types of weather, including rainy days when moist creeps everywhere. I am currently running only 100W, but may upgrade to a KW in the next few months. Are there any comments or advice on the safety of having an antenna wire in a reachable position and how to prevent accidents? Minimum spacing, insulating material? Would the RF result "only" in RF burns on the surface of the skin, or worse? A similar problem comes up with above-ground radials. My antenna wires will not be visible from my operating position in the shack. 73 - Kristinn, TF3KX |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Building an antenna | Shortwave | |||
randome wire or MP-1 antenna with FT-980 | Antenna | |||
Putting a Ferrite Rod at the Far-End of a Random Wire Antenna ? | Antenna | |||
Building a Matching Transformer for Shortwave Listener's Antenna using a Binocular Ferrite Core from a TV type Matching Transformer | Shortwave | |||
significance of feedline orientation | Shortwave |