AR-40 controller box problem
 

Hi Group,

I have a problem with my CDE AR-40 rotor controller box. The
controller will drive the rotor into the limit without stopping. I can
swap connections 4 and 5 and it goes into the limit in the other
direction.

I brought the rotor down and checked it on the bench to verify that it
was not a cable problem. I also checked it on another rotor with same.

Any one help with a schematic or has seen and fixed this problem
before?


de KJ4UO

Bad limit switch inside the rotor.

" wrote:

Hi Group,

I have a problem with my CDE AR-40 rotor controller box. The
controller will drive the rotor into the limit without stopping. I can
swap connections 4 and 5 and it goes into the limit in the other
direction.

I brought the rotor down and checked it on the bench to verify that it
was not a cable problem. I also checked it on another rotor with same.

Any one help with a schematic or has seen and fixed this problem
before?

de KJ4UO