LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old April 15th 05, 02:48 PM
Henry Kolesnik
 
Posts: n/a
Default antenna matching ??

I need a sanity check. I fellow told me he was getting a balun to get a
better match between his receiver and antenna to get a better signal to
noise ratio. I told him he was wasting his time and money because a better
match increases transfer of both signal and noise. But since he already can
hear the signal he doesn't need any more. Now if he was to get a more
directional antenna he would get a reduction in noise from the undesired
direction.

--

73
Hank WD5JFR


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a Matching Transformer for Shortwave Listener's Antenna using a Binocular Ferrite Core from a TV type Matching Transformer RHF Shortwave 13 November 3rd 04 08:34 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Shortwave 23 November 3rd 04 01:38 PM
Antenna matching 433MHz Paul Burridge Antenna 0 September 4th 04 01:45 PM


All times are GMT +1. The time now is 08:35 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017